Permanent Concrete Repair | Concrete Moisture Proofing | Concrete Protection Treatments | Moisture Barriers

KEEP UP TO DATE

Ensure you contact your nearest PROTECT CRETE office for full technical bulletins and latest application procedures

Latest Brochure

download Latest Brochure
3.2mb

TTS & MSDS ACCESS

PLEASE NOTE
To Access the
tech data and safety sheets
site membership is required

Mix Water Enhancer

mix_water_enhancer

ELIMINATES THE CAUSES OF DRY SHRINKAGE, EARLY AGE THERMAL AND PLASTIC CRACKING MAKING CONCRETE VIRTUALLY IMPERMEABLE.
CONSISTENCY - TRUCK AFTER TRUCK.

  • Increase tensile and flexural strengths
  • Greater density and less permeability
  • Reduced leaching and efflorescence
  • Uses all of the cement in your mix
  • Stronger bond of concrete to steel
  • No bleed water if properly mixed
  • Quicker and easier placement
  • Makes concrete more durable
  • Better freeze thaw resistance
  • Less shrinkage and cracking
  • Reduces slab curl
[ View MWE Summary Intro in Chinese ] 看法混合水改进物总结介绍 

HOW TO APPLY:For central batching
  1. Mix Water Enhancer can be pre-dosed into a storage water tank used for continuous batching. Call for help to determine dosage rates.
  2. Never add Mix Water Enhancer directly into the already combined mix.
  3. Always add to the mix water before the cement and aggregates.
  4. Mix Water Enhancer concrete produces a very homogenous and workable concrete that is easy to clean off tools, trucks and pumps.
DRY BATCHING DIRECTIONS:
  1. Determine volume needed at 6.5mls per Kg or .65 Litres per 100 kg of portland cement.
  2. Into a clean, rinsed transit mixer truck add 90% of the water prior to adding pre-determined volume of Mix Water Enhancer.
  3. Pull truck under plant for loading.
  4. With mixer turning in its mixing mode, load approximately 90% of the total mix water BEFORE loading cement and aggregate.
  5. Load cement, aggregates (in any order) and balance of mix water.
  6. There must be at least 110 revolutions on the transit mixer before concrete is placed at pour site or product may not perform as it should!
  7. Slump may be adjusted on site using plain water, followed by 5 minutes of additional mixing.
OTHER IMPORTANT NOTES:Never add to readymix - ONLY add to MIX WATER
Now you are using ALL of the cement in your mix an additional amount of water will be required.
  1. An adjustment of an additional 6 - 8% may be necessary.
  2. Mix Water Enhancer is compatible with your current admixtures but you may try deleting them with trials.
  3. Call your local PROTECT CRETE office for advice.
  4. We recommend the use of a painters mask during application. Refer to MSDS.
Ready For Use  DO NOT DILATE READY-FOR-USE-DO-NOT-DILUTE User Friendly - Non Toxic - Non Flammable - Zero VOC - Environmentally Safe - Odourlessausmade
Manufacturers of the world’s most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments.
PRODUCES HIGH PERFORMANCE QUALITY CONCRETE AND SIGNIFICANTLY REDUCES SHRINKAGE CRACKING
Last Updated on Friday, 26 March 2010 04:56
 
Protect Crete Australia Pty Ltd.     Unit 14/137 Rooks Road, Nunawading Victoria, Australia 3131. Tel:+61 3 9872 6172 Fax:+61 3 9872 6152
Protecta-Crete™ trading as Protect Crete Pty Ltd and PROTOCRETE™ - Copyright (c) 2006-2010
Permanent Concrete Repair | Concrete Moisture Proofing | Concrete Protection Treatments

Web development, Web Design and SEO
by online marketing agency ITSimple Online Marketing Agency Logo