|
PROTECTIVE CONCRETE COATING MAKES SURFACES MORE STAIN RESISTANT
PROVIDES WATER REPELLANCE AND INVISIBLE FINISH
- Preserves original appearance of surface (is invisible). Easy and safe to apply.
- Can be used on a wide variety of surfaces, including concrete, masonry, drywall and wood.
- Repels water and resists oil.
- Provides extra strength, integrity and flexibility.
- Resists freeze-thaw damage. Easier snow/ice removal.
- Remains resilient.
- Enhances surface traction.
- Resists fungus and mildew.
- Eliminates or greatly retards efflorescence.
- Long Lasting.
HOW TO APPLY AS A PROTECTIVE COATING:DO NOT ATOMISE!
- Always spot test an area prior to use to determine suitability.
- Always start with a clean bare surface.
- Remove all dirt, stains, glues and previous coatings.
- Using a short nap paint roller, or non atomising pump sprayer apply evenly and thinly at the rate shown on the chart. Do not over apply or allow to puddle.
- Allow at least 24 hours to dry thoroughly.
- Mask and protect areas not intended to be applied.
USEAGES - ESTIMATED M2 PER LITRE
| Adobe |
|
5 - 7 |
| Concrete |
|
4.5 - 7 |
| Brick |
|
7 - 12 |
| Pavers |
|
7 - 11 |
| Clay Tile |
|
9 - 16 |
| Grout |
|
7 - 16 |
| Limestone |
|
4.5 - 7 |
| Stucco |
|
7 - 16 |
| Slate |
|
9 - 11 |
OTHER IMPORTANT NOTES & PRECAUTIONS:
- Protect areas not intended for coverage as product is very difficult to remove when dry and may etch or damage, White precipitate may form if Surface Repeller is over applied. Surface should be washed and may need scrubbing if this occurs.
- Do not apply when ambient temperature is below 10C.
- Do not apply on exterior installations when rain is expected during the next 24 hours.
- Do not apply on hot surfaces. On hot days apply early morning or the cool evening.
- Surface Repeller has a minor almost insignificant trace of VOC.
- Incidental skin contact should not be hazardous, but ingestion or eye contact should be avoided.
- Do not apply to surface in full sun or if temperature is over 24°C.
- We recommend the use of a painters mask during application. Refer to MSDS.
Ready For Use DO NOT DILATE  UV Resistant - Waterborne - Non Flammable - Odourless - User Friendly - Non Toxic
Manufacturers of the world’s most technically advanced systems for permanent concrete repair, moisture proofing and protection treatments.
PROTECTIVE CONCRETE COATING MAKES SURFACES MORE STAIN RESISTANT & PROVIDES WATER REPELLENCE WITH AN INVISIBLE FINISH
|
|
Last Updated on Friday, 26 February 2010 00:14 |
